Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 208)

Appendix A Micro488/EX Command Summary
A.8
Sets the format of the TIME output. Refer to the TIME FORMAT
command description for option details.
TIME OUT TI[ME OUT][;][time]
Set the number of time seconds to wait for a bus transfer before
a time out error will be declared. Checking for Time Out is
suppressed by specifying 0 seconds.
TRACE TRACE{ON|OFF}
Enable or disable tracing during Macro buffer execution.
TRIGGER TR[IGGER][addr[,addr…]]
Trigger bus devices by optionally listen addressed followed by
Group Execute Trigger.
WAIT WAIT [TIME] [;] hh:mm [:ss ] [ AM | PM ]
WAIT until the time specified before continuing.
WAIT DATE WAIT DATE [;] {option}
WAIT until the DATE specified before continuing. Refer to the
WAIT command description for an option list.
WAIT DAY WAIT DAY [;] {option}
WAIT until the day of the week specified before continuing. Refer
to the WAIT command description for an option list.