Meinberg GPS167LCD-MP - Manual (Page 16)

16
NEXT Key
When editing parameters (LCD cursor is visible) this key moves the cursor to the next
digit rsp. to the next parameter to be edited. If the current menu just displays data
(cursor not visible) pressing this key switches to a submenu (if available).
INC Key
When editing parameters this key increments the digit or letter at the cursor position.
The Menus in Detail
Root Menu
The root menu is shown when the receiver has completed initialization after power-
up. The first line of the display shows the receiver´s mode of operation as described
above. The text "NORMAL OPERATION" might be replaced by "COLD BOOT",
"WARM BOOT", "UPDATE ALMANAC". If the antenna is disconnected or not
working properly, the text "ANTENNA FAULTY" is displayed instead.
GPS: NORMAL OPERATION Wed, 09.05.2001
MESZ 10:04:10
At the end of the two lines the day of the week, the current date, the name of the time
zone (as defined in the setup menu) and local time is displayed.
If the NEXT key is pressed from the root menu a submenu is displayed showing the
receiver´s software revision:
Meinberg GPS167 S/N: 100XXX20
REV:4.30 ED167 LCD