Meinberg GPS167LCD-MP - Manual (Page 25)

25
INIT GPS PARMS
This menu lets the user initialize all GPS datas, i.e. all saved satellite datas will be
cleared. The user has to acknowledge this menu again before the initialisation starts.
The system starts operating in the COLD BOOT mode and seeks for a satellite to read
its actual parameters.
SETUP: INIT GPS PARMS
Are you sure ? Press ...
INC => YES MENU => NO
FORCE BOOT MODE
This menu lets the user force the receiver into the Boot Mode. This may be necessary
when the satellite datas in the memory are too old or the receiver position has changed
by some hundred kilometers since last operation. Syncronisation time may be reduced
significant. If there is valid satellite data in the memory the system starts in the
WARM BOOT mode, otherwise the system changes into COLD BOOT to read new
data.
SETUP: FORCE BOOT MODE
Are you sure ? Press ...
INC => YES MENU => NO