Denon AVR-1611 - Manual (Page 46)

43
ENGLISH
Basic version
Simple version
Information
Advanced version
Input Setup
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
Rename
Change the display name of the selected input source.
Setting items Setting details
Rename
Change the display name of
the selected input source. • Up to eight characters can be input.
• For character input, see page 38.
Default
The input source name
is returned to the default
setting. Yes : Reset to the defaults.
No : Do not reset to the defaults.
Source Level
Default settings are underlined.
• This function corrects the playback level of the selected input source’s audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
Setting details
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which “HDMI” or “Digital” is assigned at “Input Assign“ (vpage 41).
Playback Mode
This item can be set when the input source is “DOCK”.
Setting items Setting details
Repeat
Make settings for repeat
mode. All : All files are played repeatedly.
One : A file being played is played repeatedly.
OFF : Repeat playback mode is canceled.
Shuffle
Make settings for shuffle
mode. n When DENON control dock for iPod ASD-1R or ASD-11R is
connected
Songs : All files are played in shuffle playback mode.
Albums : Files in the album are played in shuffle playback mode.
OFF : Shuffle playback mode is canceled.
n When DENON control dock for iPod ASD-3N, ASD-3W, ASD-51N
or ASD-51W is connected
ON : Shuffle playback mode is enabled.
OFF : Shuffle playback mode is canceled.
Audio Adjust
The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently
set surround mode. For details on the adjustable parameters, see “Surround modes and surround
parameters” (vpage 65).
Menu operation
1
Press ZONE SELECT to switch the zone mode to “MAIN”.
The “MAIN” indicator lights.
2
Press AMP to set the remote control unit to amplifier operation
mode.
3
Press MENU .
The menu is displayed on the TV screen.
4 Press ui to select the menu to be set or operated.
5
Press ENTER to enter the setting.
• To return to the previous item, press RETURN .
• Exiting the Menu, press MENU while the menu is displayed.
The menu display disappears.
Items that can be set with the Audio Adjust procedure
Surround Parameter (vpage 44)
Tone (vpage 45)
Audyssey Settings (vpage 46)
Manual EQ (vpage 47)
RESTORER (vpage 48)
Audio Delay (vpage 48)