Metz MECABLITZ 64 AF-1 digital Pentax - Manual (Page 186)

10.1.2 Setting the exposure correction (EV)
on the master flash unit
• Press the sensor button on the touch
display.
• Press the sensor buttons on the
touch display and set the desired exposure
correction (e.g. +1).
• Press the sensor button for the desired
exposure correction value .
The setting is adopted immediately.
10.1.3 Remote channel settings
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
+1
EV
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select a remote channel,
e.g .
• Press the sensor button on the touch
display for the desired channel.
The setting will take effect immediately.
Press ቦ and check the channel setting. i
CHANNEL 2
CHANNEL
PARAMETER
D
186
k
M-
Zoom 35
i
EV
m
m
REMOTE
MASTER
EV
O
q p
2/3
1
1 1/3
PARAMETER
PARAMETER
ZOOM
RATIO
CHANNEL
CHANNEL
O
q p
CHANNEL 1
CHANNEL 2
CHANNEL 3