Metz MECABLITZ 64 AF-1 digital Pentax - Manual (Page 209)

16.2 Conditioning the flash capacitor
The flash capacitor built into the flash unit
undergoes a physical change when the
device has not been used for a long time.
For this reason it is necessary to switch the
device every three months for approx.
10 mins. The power supplies must deliver
enough power so that flash standby lights up
no later than 1 min after switching on.
16.3 Reset
The flash unit can be reset to the factory set-
tings when delivered.
Setting procedure
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor button on the touch
display.
• Press the sensor button on the touch
display.
All settings are adopted immediately and
the flash unit is reset to its factory settings.
This will not affect the firmware updates for
the flash unit !
SERVICE
RESET
ON
D
209
k
SERVICE
SERVICE
O
BRIGHTNESS
RESET
ROTATION
RESET
O
OFF
ON