Metz MECABLITZ 64 AF-1 digital Pentax - Manual (Page 188)

10.3.1 Remote slave flash mode settings
• Switch on the flash unit with the
ባ
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. PTTL flash mode).
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the s ensor button on
the touch display.
Remote slave mode is set.
In addition, the selected flash mode (e.g.
TTL) and the remote channel (e.g. CH 1) are
displayed.
REMOTE SLAVE
REMOTE SLAVE
10.3.2 Setting the slave channel
• Press the sensor button on the touch
display for the channel group (e.g.
).
The window for selecting the channel and
group appears.
• Press the sensor buttons on the touch
display for the channel .
• Press the sensor buttons on the
touch display and select the desired
channel.
• Press the selected channel on the touch
display.
The setting will take effect immediately.
“CH2” appears on the display.
TTL I Ch1
CHANNEL
188
k
MODE
O
q p
REMOTE CONTROL
REMOTE SLAVE
SERVO
M-
Zoom 35
REMOTE
SLAVE
TTL Ch
1
i
m
m
P
1/1
M-
Zoom 35
REMOTE
SLAVE
TTL Ch
1
i
m
m
P
1/1
0.8- 9.0 m
F
5,6
M-
Zoom 35 m
m
PTTL
i
EV
SLAVE
O
CHANNEL
MODE
M-
Zoom 35
REMOTE
SLAVE
TTL Ch
2
i
m
m
CHANNEL
O
q p
CHANNEL 1
CHANNEL 2
CHANNEL 3
EV