M- zoom 35, Slave o, Mode o – Metz MECABLITZ 64 AF-1 digital Pentax User Manual
Page 189

10.3.3 Set slave mode
• Press the sensor button on the touch
display for the partial light output/
exposure correction (e.g.
).
The window for the selection appears.
• Press the sensor buttons on the touch
display for the channel
.
• Press the sensor button on the touch
display for the desired mode of operation
or .
The setting is applied automatically.
M
TTL
TTL I CH1
MODE
10.3.4 Setting partial light output correction
• Press the sensor button
for partial light
output on the touch display as many times
as it takes for the partial light output
display to appear.
• Press sensor buttons
on the
touch display and set the desired partial
light output to 1/1, 1/2, 1/8 to 1/256 .
• Press the sensor button on the touch
display for the selected partial light output
(e.g. 1/16).
The partial light output is adopted.
Once the slave flash units have achieved
flash-readiness, the AF measurement flash
flashes.
1/16
P
189
M-
Zoom 35
REMOTE
SLAVE
M
Ch
2
i
m
m
M-
Zoom 35
REMOTE
SLAVE
TTL
Ch
2
i
m
m
SLAVE
O
CHANNEL
MODE
MODE
O
TTL
M
P
1/1
M-
Zoom 35
REMOTE
SLAVE
M
Ch
2
i
m
m
P
1/1
k
P
O
q
p
1/8 - 2/3
1/16
1/16 - 1/3