Microcom 466 - Manual (Page 89)

Appendix B Quick Reference Command Summary
466 Operators Manual 83
^A ^D COMMAND
22 Change SW2: Change software switch bank #2.
12345678
^ABxxxxxxxx
*******.)))),
******.)))),*
*****.)))),**
***** *** Power-up Label Format
***** 000=Power-up Format Disabled
***** 001=ROM or Saved Format File 1
***** 010=ROM or Saved Format File 2
***** 011=ROM or Saved Format File 3
***** 100=ROM or Saved Format File 4
***** 101=ROM or Saved Format File 5
***** 110=ROM or Saved Format File 6
***** 111=ROM or Saved Format File 7
****.))))) 1=Use Saved Format File, 0=Rom Format
***.)))))) 1=Print Button Enable, 0=Disable
**.))))))) 1=Line Feed Button Disable, 0=Enable
*.)))))))) 1=>RESTARTED< Message Enable, 0=Disable
.))))))))) 1=Clear Text Enable, 0=Disable
23 Change SW3: Change software switch bank #3.
12345678
^ABxxxxxxxx
*******. Detect Black Line on Power-up (transmissive)
******.) Detect Black Line on Power-up (reflective)
*****.)) 1=Enable TOF button, 0=Disable
****.))) 1=Enable TOF at Power-up, 0=Disable
***.)))) Always 0
**.))))) 1=Status after Print (COM1 & 2), 0=No Response
*.)))))) 1=Disable Extended ASCII, 0=Enable (COM2)
.))))))) 1=Disable Extended ASCII, 0=Enable (COM1)