Nevion Flashcase-II model 1 - Manual (Page 10)

FlashCase-II model 1 Rev. A
nevion.com | 10
5
Operation
5.1 Multicon
Figure 8 shows fan no. 2 failing and no external power supply connected to input 1.
NOTE: An alarm will be triggered when the system is started with only one
external power source connection. This is a prompt to verify connection source.

If the intention is to connect to one source, please acknowledge the alarm

If the intention is to connect to two sources, please check the connections
Figure 8: front page
Figure 9 shows the configuration page.
NOTE: There are no user configurable parameters or alarm thresholds for this
product.
NOTE: Fan voltage has no alarm in , however; a fan alarm (“Fan 1 fail”, “Fan 2
fail”) will be triggered when a significant drop in fan voltage occurs.