Nevion ETH-1000-SW-10G - Manual (Page 8)

ETH1000-SW-10G Rev. E
nevion.com | 8
5
Connections
Figure 4 Connector module for ETH-1000-SW-10G
5.1 Mounting the connector module
The details of how the connector module is mounted, is found in the user manual for the sub-
rack frame FR-2RU-10-2.
This manual is also available from our web site:
http://www.nevion.com/ .
5.2 Terminal ports
Table 2: Terminal ports
Terminal Function Supported Format Mode
OPT1 Optical input 10GBase-XR Input
OPT2 Bi-directional 10GBase-XR Output
ETH1 to 5 Electrical Ethernet 10/100/1000Base-T(x) Bi-directional
GPIO Open Collector Alarms
Laser off input
Wired alarms
Configuration
OC Output
TTL input
Unused inputs should be terminated to avoid alarms triggered by noise.