Nevion SL-3GHD128128-RC - Manual (Page 17)

SL-3GHD128128-RC Rev. A
nevion.com | 17
3.9 Configuring Output options
This configuration is done in the Nevion Configurator.
3.9.1 Output reclocker
It is possible to enable, or bypass, Output Reclocker for each router output separately.
Default is Output Reclocker enabled.
3.9.2 Slew rate settings
3.9.2.1 Slew rate mode
Set slew rate mode on output (Auto / Fixed).
Automatic slew rate detection is only available on reclocking routers.
Non-reclocking routers can only set the options based on Fixed slew rate mode.
3.9.2.2 Slew rate
Set slew rate to SD or HD. Only used when Slew rate mode is fixed.
3.9.3 Laser settings
This is only applicable on Sublimes with optical I/O.
3.9.3.1 Laser enabled
Enable or disable laser; (ON / OFF). It is useful to disable a laser, for safety purposes, if
maintenance is required on the receiving end of the fiber.