Nevion SL-D32P+ - Manual (Page 8)

SL-D32P+ Rev. F
nevion.com | 8
3
Configuration
It is possible to use the router out-of-the-box. Changes to the factory settings can be set
with the dip-switches found in the back of the router.
As factory setting, the SL-D32P+ is shipped with Dynamic ports. This means every port can
be controller or device depending on the connected equipment.
Full access to the Sublime SL-D32P+ Ported Data Router configuration is achieved with the
Nevion Configurator in combination with the dip-switches.
3.1 Nevion Configurator
The Nevion Configurator is a unified configuration tool for routers interconnected over
Ethernet. The Nevion Configurator makes system set-up easy and includes a wizard to
guide you through the set-up procedures. When scanning the network, the Nevion
Configurator auto detects all connected hardware. It also provides interactive help, giving
Auto Feedback on non-logical settings.
For more information about the Nevion Configurator and its advanced configuration
possibilities, please use the interactive help menus included in the software.
Dynamic: The Controller/Device is according to the connected units itself.
Fixed: The Port can be set to either be Controller (Master) or Device (Slave).