NIStune Type 1 Diagnostics - Manual (Page 7)

6. Special case for Type 1 boards sold in 2008 (Revision 1, 2 limited to release of 24 boards)
Check your ECU Nistune patched software is running correctly.
Confirm your car will idle and operate as normal to check the ECU software properly. If it doesn't you may
have a corrupt ECU image.
• You must upload the emulator again from the correct supplied Nistune patched image matching the
address file selected from the Documents\Nistune\Address\Type1_Rev2_only folder
• If this fails then try a standard factory image in the Emulator
• If this fails, try the Emulator without the Nistune board with standard factory image
• If the emulator fails to function then try the same image on EPROM
• If the EPROM fails to function you either have a corrupt image or an ECU connection problem. Try
another image or ECU.
The Pocket Romulator is susceptible to internal damage from voltage leaks from a laptop. Ensure the
laptop has a grounding strap from some metal chassis on the laptop to the vehicle chassis
This is detailed in their FAQ
http://xtronics.com/memory/pktROM.htm