Onwa Marine Electronics KAP-833 - Manual (Page 14)

To engage AUTO Mode - Panel or Hand Remote and Steering Lever.
Course Adjustment
When AUTO mode is engaged, turning the Remote knob (or lever) will alter
the course to steer. This change will be reflected on the digital heading
display. If the remote AUTO mode was engaged with remote knob at centre,
the course can be changed to port or stbd by 90 degrees.
To disengage AUTO Mode
Either move the remote switch to Off (which also disengages the autopilot)
or press the desired mode key on the KAP-833 main panel (Auto, GPS,
Power or Standby).
Remote Unit Operation Remote Unit Operation
3 3
The Panel and Hand Remotes come with a 3-way switch for selecting POWER,
Off or AUTO features.
The Steering Lever can be supplied with or without a 3 way switch. When the
switch is fitted, the Steering Lever is used in the same way as a Panel or Hand
Remote. When supplied without a switch, the Lever is used as an Electric Wheel.
The Electric Helm or Steering Lever (without switch) are dash mounted units and
control rudder angle by manually turning the wheel or moving the lever.
Ensure the Remote Switch is Off and knob (or lever) is set to centre. Move
the remote switch from Off to AUTO.
9