Onwa Marine Electronics KAP-833 - Manual (Page 15)

To engage Power Steer Mode
Ensure the remote unit switch is set to Off, and the remote dial (or steering
lever) is set to centre. Change the remote switch to the Power position.
The remote dial (or steering lever) now acts as the helm, giving control
over the movement of the rudder. The maximum rudder angle is controlled
by the rudder limit adjustment on the KAP-833 main panel.
t
To disengage Power Steer Mode
Return The rudder to centre before switching to Off.
Electric Helm or Steering Lever
The KAP-833 can be customised to accept input from an electric helm
(steering wheel) or Steering Lever to provide electric steering in place of,
or in addition to, manual steering. The KAP-833 is programmed to suit a
customer's needs. For full electric steering, Power Steer mode will
automatically be selected at turn-on. For manual steering plus electric
steering, Power Steering must be selected manually on the KAP-833 unit.
In both of these options, the course-change knob on the KAP-833 has no
effect in Power mode.
The Remote Operation can be modified by the Installing Technician as listed
in special modes section of this manual.
10