Onwa Marine Electronics KAP-833 - Manual (Page 8)

Engaging Auto steering mode
When in Standby Mode and the AUTO key is pressed, a beep will
sound and the adjacent yellow light will be turned on.
The autopilot will lock on to the heading indicated.
Disengaging the Autopilot
Press the Standby button. A beep will sound and the vessel will return to
manual steering (Standby Mode). The AUTO light will be turned off and
STANDBY light turned on.
Course Adjustment
Pressing the port (red) or stbd (green) arrow keys will cause a one degree
course change in that direction. The display will change to indicate the
new course-to-steer.
Rotating the course-change knob will change the course-to-steer by one
degree for each
click .
Entering a course from the keypad, and pressing GOTO will change the
course-to-steer to the bearing entered.
Auto Mode 3
3