Osburn OB02401 User Manual
Page 2
2
INTRODUCTION
SBI INC., one of the most important wood stove and fireplace manufacturers in Canada,
congratulates you on your purchase and wishes to help you get maximum satisfaction from your
wood stove. In the pages that follow, we will give you advice on wood heating and controlled
combustion as well as technical specifications regarding installation, operation and maintenance
of the model you have chosen.
The instructions pertaining to the installation of your wood stove comply with ULC-S628 and UL-
1482 standards.
We recommend that our wood burning hearth products be installed and serviced by
professionals who are certified in the United States by NFI (National Fireplace Institute
®
) or in
Canada by WETT (Wood Energy Technical Training) or in Quebec by APC (Association des
Professionnels du Chauffage).
Read this entire manual before you install and use your new stove. If this stove is not
properly installed, a house fire may result. To reduce the risk of fire, follow the
installation instructions. Failure to follow instructions may result in property damage,
bodily injury, or even death.
Consult your municipal building department or fire officials about restrictions and
installations requirements in your area and the need to obtain a permit.
Keep this instructions manual for future references.
CAUTIONS:
•
T
HE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE APPLIANCE ALWAYS
OVERRIDES THE INFORMATION PUBLISHED
,
IN ANY OTHER MEDIA
(
OWNER
’
S MANUAL
,
CATALOGUES
,
FLYERS
,
MAGAZINES AND
/
OR WEB SITES
).
•
HOT WHILE IN OPERATION
.
KEEP CHILDREN
,
CLOTHING AND FURNITURE AWAY
.
CONTACT MAY CAUSE
SKIN BURNS
.
•
DO NOT USE CHEMICALS OR FLUIDS TO IGNITE THE FIRE
.
•
DO NOT LEAVE THE STOVE UNATTENDED WHEN THE DOOR IS SLIGHTLY OPENED
.
•
DO NOT BURN WASTES
,
FLAMMABLE FLUID SUCH AS GASOLINE
,
NAPHTHA OR MOTOR OIL
.
•
DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM
.
•
ALWAYS CLOSE THE DOOR AFTER THE IGNITION
.
This heating unit must serve as a supplementary heat source. An alternative heat source should be available in the home if
needed. The manufacturer cannot be responsible for additional heating costs associated with the use of an alternative heat
source.
It is highly recommended that the user buys this product from a retailer who can provide installation and maintenance advices.