Using your water heater, Notice, Notices – Paloma PHH-32 part 1 User Manual

Page 14: Danger, Setting the water temperature (cont.), Use instructions, Water heater facts

Advertising
background image

14

Use Instructions

USING YOUR WATER HEATER

Maximum water temperature occurs while the

water heater burner is on. To determine the water

temperature:

Turn on the hot water faucet and place a

thermometer in the water stream.

NOTICE:

Water temperature at the faucet

may vary depending on the season and the length

of pipe from the water heater.

The remote control temperature range is between

100°F (38°C) and 120°F (49°C). To adjust the

temperature to a desired setting, press the UP

or DOWN adjustment button on the face of the

remote control. The new temperature set point will

show on the LED display.

NOTICES:

The temperature set point on the standard

remote control cannot be increased above

112°F (44°C) when a hot water faucet is in the

open position. To achieve temperatures above

120°F (49°C) or 85°F (29°C), contact a qualified

service technician. Only factory-authorized

remote control(s) should be used.

The water heater may not operate with a

small water flow. Increase the water flow and

recheck. If it still does not operate with the hot

water faucet completely open, increase the

temperature setting on the remote control.

Water Heater Facts

DANGER:

Water temperatures above

125°F (52°C) will result in death and/or severe

burns from scalding.
The hottest-temperature water will be at the

faucet closest to the water heater.

Always remember to test the water temperature

with your hand before use.

Always supervise young children or others who

are incapacitated.

The water heater is equipped with a device

that will shut off the gas supply to the burner

if the water heater exceeds normal operating

temperatures.

Any water heater that has been subjected to fire,

flood, physical damage, or been under water

should be turned off at the manual gas shut-off

valve and not used until it has been checked by

qualified service personnel.

Temperature

Adjustment

Buttons

Power On/Off

Button and

Indicator

LED Temperature

and Error Code

Display

In-Use Indicator

(Lit during operation)

Priority

Indicator

Setting the Water Temperature (cont.)

Advertising
This manual is related to the following products: