D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 - Manual (Page 155)

Overview 155
24
Outbound Telnet
This section describes the Outbound Telnet feature.
Overview
Outbound Telnet:
• Feature establishes an outbound telnet connection between a device and a remote host.
• When a telnet connection is initiated, each side of the connection is assumed to originate
and terminate at a “Network Virtual Terminal” (NVT).
•
Server and user hosts do not maintain information about the characteristics of each other’s
terminals and terminal handling conventions.
• Must use a valid IP address.
CLI Examples
The following are examples of the commands used in the Outbound Telnet feature.