Port description, Cli example, Example #1: enter a description for a port – D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 User Manual
Page 173: Example #2: show the port description, 28 port description
Advertising
CLI Example
173
28
Port Description
The Port Description feature lets you specify an alphanumeric interface identifier that can be
used for SNMP network management.
CLI Example
Use the commands shown below for the Port Description feature.
Example #1: Enter a Description for a Port
This example specifies the name “Test” for port 0/10:
config
interface 0/10
description Test
exit
exit
Example #2: Show the Port Description
show port description 0/10
Interface.......0/10
ifIndex.........10
Description.....Test
MAC Address.....00:00:00:01:00:02
Bit Offset Val..10
Advertising