Example 1: create two port-channels, Figure 9. lag/port-channel example network diagram – D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 User Manual
Page 48
Advertising

48
© 2001- 2008 D-Link Corporation. All Rights Reserved.
Wired Configuration Guide
shows the example network.
Figure 9. LAG/Port-channel Example Network Diagram
Example 1: Create two port-channels:
(DWS-3024) #config
(DWS-3024) (Config)#port-channel lag_10
(DWS-3024) (Config)#port-channel lag_20
(DWS-3024) (Config)#exit
Use the show port-channel all command to show the logical interface ids you will use to
identify the port-channels in subsequent commands. Assume that lag_10 is assigned id 3/1 and
lag_20 is assigned id 3/2.
3UBNET
0ORT
,!'?
,AYER
0ORT
,!'?
3ERVER
0ORT
0ORT
,!'?
5NIFIED
3UBNET
3UBNET
Advertising