Port security, Overview, Operation – D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 User Manual

Page 63: 9 port security

Advertising
background image

Overview

63

9

Port Security

This section describes the Port Security feature.

Overview

Port Security:

•

Allows for limiting the number of MAC addresses on a given port.

•

Packets that have a matching MAC address (secure packets) are forwarded; all other pack-
ets (unsecure packets) are restricted.

•

Enabled on a per port basis.

•

When locked, only packets with allowable MAC address will be forwarded.

•

Supports both dynamic and static.

•

Implement two traffic filtering methods. These methods can be used concurrently.

-

Dynamic Locking - User specifies the maximum number of MAC addresses that can
be learned on a port. After the limit is reached, additional MAC addresses are not
learned. Only frames with an allowable source MAC address are forwarded.

-

Static Locking - User manually specifies a list of static MAC addresses for a port.
Dynamically locked addresses can be converted to statically locked addresses.

Operation

Port Security:

•

Helps secure network by preventing unknown devices from forwarding packets.

•

When link goes down, all dynamically locked addresses are ‘freed.’

•

If a specific MAC address is to be set for a port, set the dynamic entries to 0, then only
allow packets with a MAC address matching the MAC address in the static list.

•

Dynamically locked MAC addresses are aged out if another packet with that address is not
seen within the age-out time. The user can set the time-out value.

•

Dynamically locked MAC addresses are eligible to be learned by another port.

•

Static MAC addresses are not eligible for aging.

•

Dynamically locked addresses can be converted to statically locked addresses.

Advertising