Figure 28. lldp interface configuration – D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM DWS-3000 User Manual

Page 72

Advertising
background image

72

© 2001- 2008 D-Link Corporation. All Rights Reserved.

Wired Configuration Guide

Use the LLDP Interface Configuration screen to specify transmit and receive functions for
individual interfaces.

Figure 28. LLDP Interface Configuration

Interface Parameters

•

Interface — Specifies the port to be affected by these parameters.

•

Transmit Mode — Enables or disables the transmit function. The default is disabled.

•

Receive Mode — Enables or disables the receive function. The default is disabled.

•

Transmit Management Information — Enables or disables transmission of management
address instance. Default is disabled.

•

Notification Mode — Enables or disables remote change notifications. The default is dis-
abled.

•

Included TLVs — Selects TLV information to transmit. Choices include System Name,
System Capabilities, System Description, and Port Description.

Advertising