Remotec ZTS-110 V3.05 - Manual (Page 18)

Parameter value range Parameter No. Functions
0 (0x00) = disable AUTO report if room
temperature is different from last report.
AUTO report if room temperature is different from
last report.
Delta change is >=
o o 1 (0x01) = 1 F (0.5 C)
o o 2 (0x02) = 2 F (1.0 C)
o o 3 (0x03) = 3 F (1.5 C)
o o 4 (0x04) = 4 F (2.0 C), (default)
o o 5 (0x05) = 5 F (2.5 C)
o o 6 (0x06) = 6 F (3.0 C)
o o 7 (0x07) = 7 F (3.5 C)
o o 8 (0x08) = 8 F (4.0 C)
11 (0x0B)
Trigger AUTO report
if room temperature
is different from last
report.
(It will report room
temperature only)
*User can use this
function to enhance
batteries service life.
Example for sensor temperature calibration:
o o reading temperature (77 F) + (-2 F)
If using decimal input
Parameter no. = 13
Parameter value = -2
If using hexadecimal input
Parameter no. = 0D
Parameter value = FE ( Size >= 1 byte)
o o Display temperature = sensor reading value + offset value = 77 - 2 F = 75 F
0 (0x00) = disable AUTO report function.
(by time interval)
AUTO report timer:
1 (0x01) = 0.5 hr
2 (0x02) = 1.0 hr,
(default)
3 (0x03) = 1.5 hrs
4 (0x04) = 2.0 hrs
5 (0x05) = 2.5 hrs
6 (0x06) = 3.0 hrs
7 (0x07) = 3.5 hrs
8 (0x08) = 4.0 hrs
9 (0x09) = 4.5 hrs
10 (0x0A) = 5.0 hrs
11 (0x0B) = 5.5 hrs
12 (0x0C) = 6.0 hrs
13 (0x0D) = 6.5 hrs
14 (0x0E) = 7.0 hrs
15 (0x0F) = 7.5 hrs
16 (0x10) = 8.0 hrs
12 (0x0C)
AUTO report by time
interval.
(It will report room
temperature only)
*User can use this
function to enhance
batteries service life.
Parameter value range Parameter No. Functions
Temperature offset value.
Formula: Display temperature
= sensor reading value + offset value
(unit = degree F)
o 0 (0x00) = 0 F (default)
o o 1 (0x01) = 1 F (0.5 C)
o o 2 (0x02) = 2 F (1.0 C)
o o 3 (0x03) = 3 F (1.5 C)
o o 4 (0x04) = 4 F (2.0 C)
o o 5 (0x05) = 5 F (2.5 C)
o o 6 (0x06) = 6 F (3.0 C)
o o 7 (0x07) = 7 F (3.5 C)
o o 8 (0x08) = 8 F (4.0 C)
o o 9 (0x09) = 9 F (4.5 C)
o o 10 (0x0A) = 10 F (5.0 C)
o o -1 (0xFF) = -1 F (-0.5 C)
o o -2 (0xFE) = -2 F (-1.0 C)
o o -3 (0xFD) = -3 F (-1.5 C)
o o -4 (0xFC) = -4 F (-2.0 C)
o o -5 (0xFB) = -5 F (-2.5 C)
o o -6 (0xFA) = -6 F (-3.0 C)
o o -7 (0xF9) = -7 F (-3.5 C)
o o -8 (0xF8) = -8 F (-4.0 C)
o o -9 (0xF7) = -9 F (-4.5 C)
o o -10 (0xF6) = -10 F (-5.0 C)
13 (0x0D)
Sensor temperature
calibration.
(This parameter is
used to change the
display temperature
to match with your
previous thermostat,
or to match another
thermostat already in
your home)
33 34
Parameter value range Parameter No. Functions
o o -2 (0xFE) = -2 F (-1.0 C) 13 (0x0D) Sensor temperature
calibration