Remotec ZTS-110 V3.05 - Manual (Page 8)

13 14
If you deactivated the Easy mode, you can continue to set up Day, Clock, 12/24
hour, F/C, Swing and Differential. Refer to below for steps:
LCD indication Step Procedure / Description
Press and hold "Mode" key for 2 seconds
to entry the setting mode.
It will display "EASY YES" if it stays in
EASY mode. Otherwise, it will display
"EASY no" if EASY mode is deactivated.
Press Up/Down key to toggle the selection.
Press "Prog" key to confirm your settings.
- it will go back to Home page if selected
"YES".
- it will go to Day setting if selected "no".
EASY mode (default)
Local control active functions:
- Change Mode
- Change Fan mode
- Temperature Scale selection
Local control inactive functions:
- Scheduling
- Program Mode
- Clock Display
- Setting Time
- Setting Swing
- Setting Differential Set-Point
- Advanced Recovery Mode
EASY mode is deactivated
- Support full functions at local and Z-Wave
control
1
Day will keep flashing, press Up/Down key
to set day from MO-SU.
2
Press "Prog" key once to confirm the setting
and it will go to hour setting.
Hour will keep flashing, press Up/Down key
to set hour.
3
MO
AM
MO
LCD indication Step Procedure / Description
Press "Prog" key once to confirm the setting
and it will go to minutes setting.
Minutes will keep flashing, press Up/Down
key to set minutes.
4
Press "Prog" key once to confirm the setting
and it will go to 12/24 hour clock selection.
Press Up/Down key to toggle the 12/24
hour clock selection.
5
Press "Prog" key once to confirm the setting
and it will go to temperature F (Fahrenheit)
-> C (Celsius) selection.
Press Up/Down key to toggle the
temperature F (Fahrenheit) -> C (Celsius)
selection.
6
Press "Prog" key once to confirm the setting
and it will go to swing setting.
Press Up/Down key to set the swing setting.
o o o o (Range is from 0.5 C to 2 C or 1 F to 4 F )
7
AM
MO
AM
PM
HR
SWING
Press "Prog" key once to confirm the setting
and it will go to differential set point setting.
Press Up/Down key to set the differential set
o o point setting. (Range is from 0.5 C to 2 C or
o o 1 F to 4 F )
8
MO
DIFF