Remotec BXT-120 V2.0 - Manual (Page 5)

5
Tips for positioning your BXT‐120
Environment A
Ideally, you should position the BXT‐120 on top of an open cabinet
near your AV devices.
On top of an open cabinet
Environment B
If you have more than one AV devices at cabinet, you can place BXT‐
120 at the teapoy and aimed to the receiver of AV devices.
If you position your BXT‐120 so that it does not have a direct line‐of‐
sight to your AV devices, it still may be able to reach them by
bouncing its signals off of walls, floors or ceilings. If your ceiling is very
high, or if the back wall of the room is too far away, you might need to
move the BXT‐120 closer to the AV devices.
Placed at teapoy