Research Concepts RC300 - Manual (Page 24)

RC300 Flyaway Companion 24
4.8.2 Calibrate the Z-Axis of the Compass
Step 1) Remove the unit from the antenna.
Step 2) Open the configuration page by typing “192.168.252.1/config” into the address bar of your
web browser.
Step 3) Start the compass calibration routine by clicking the “Calibrate Compass Z…” button.
Step 4) Move the unit so that the back of the box is facing directly north. The front of the box (the
side with the black overlay) should be facing directly south.
Step 5) Press OK.
Research Concepts, Inc. ♦ 5420 Martindale Rd ♦ Shawnee, KS 66218-9680 USA www.researchconcepts.com