Research Concepts RC300 - Manual (Page 27)

RC300 Flyaway Companion 27
4.9 Calibrate the Inclinometer
Step 1) Open the configuration page by typing “192.168.252.1/config” into the address bar of your
web browser.
Step 2) Start the inclinometer calibration routine by clicking the “Calibrate Inclinometer…” button.
Step 3) Move your antenna reflector to the face-vertical position.
Step 4) Press OK.
Step 5) Move your antenna up in elevation until reflector is at a 45 degree angle.
Step 6) Press OK.
Research Concepts, Inc. ♦ 5420 Martindale Rd ♦ Shawnee, KS 66218-9680 USA www.researchconcepts.com