RGBLink VENUS X1 User Manual - Manual (Page 116)

6. System Setup and Operation
How to Load the Saved Parameter
VENUS X1 User Manual 116
How to Load the Saved Parameter
VENUS X1 provides 36 save preferences, operations are as follows:
1. Push the [LOAD/6] button, the button light is on, and enable the LOAD
function.
2. Turn the knob, and choose the position that will load, push the knob to
confirm.
3. Push the [LOAD/6] button again, the button light if off, and disable the
LOAD function.
RECALL SAVE
->SAVE 1
Button on is ready for recall
Button flashes means just recall