RGBLink VSP 3550S User Manual - Manual (Page 67)

5. System Setup and Operations
How to Crop the Layer Image
VSP 3550 User Manual 67
How to Crop the Layer Image
Firstly, ensure the device is power on and in normal operation.
Operations are as follows:
1. Push any button of OUTPUT DVI1~DVI4, the button blinks, and the
layer can be edited.
2. Push [CROP] button, key lights, and start the crop function, OLED
shows as follows:
3. Turn the knob, or push the number button to input the number directly,
push the knob to confirm. OLED shows as follows:
4. Push [CROP] button again, key light is off, and exit the crop function.
— >CROP WIDTH 1024
CROP HEIGHT 768
CROP X 0
CROP Y 0
RESET