RGBLink VSP 3500 User Manual - Manual (Page 81)

5. Communication Software Guideline
How to control processor with console software by USB?
VSP 3500 User Manual 81
How to control processor with console
software by USB?
Install the driver
Firstly, release the following compression bag: ;
Secondly, find in the file: Dfuse; ( Install
VCP_V1.3.1_Setup.exe if the computer system is 32 bit system, and if
the computer system is 64 bit system, install
VCP_V1.3.1_Setup_amd64.exe） . Connect the USB cable to the PC and
the video processor .turn on the VSP 3500, for the first time to use USB,
the PC will remind finding the new hardware and ask to install the driver for
this new driver:
Install from the list or specifie d location, press ―NEXT‖:
Press ―browser‖ to find the driver, and press ―NEXT‖: