RGBLink VSP 3500 User Manual - Manual (Page 95)

6. System Setup and Operations
How to achieve split function?
VSP 3500 User Manual 95
3. Rotate left/right knob, user can select the split mode according to
actual demand;
4. In OUTPUTS area, press any key of DVI1, DVI2, DVI3, DVI4, select
preset output, key lights, and it is selected;
5. In CUSTOM ADJUSTMENTS area, press 【 SCALE 】 key and
【 Position 】 key , key lights, user can set the size and position of
output image;
6. Rotate left/right knob and up/down knob, user can set the size and
position of output image;
7. In OUTPUTS area, press DVI1, DVI2, DVI3, DVI4 again, regulate the
selected output, repeat step 5 and 6 to complete regulation setting.
Note
When VSP 3500 is in split mode, it only split for
A layer, and is invalid for other layers.