RGBLink VSP 112U - Manual (Page 94)

6. System Setup and Operation
How to Realize the Text Overlay Setting
VSP 112U User Manual 94
How to Realize the Text Overlay Setting
Before setting the text overlay, please make sure the input channel of the
text. For example, set VGA input as the text channel. Then make sure the
channel that the text will overlay, for example, overlay the text on CV1
channel. The operations are as follows:
1. Push VGA button to make sure there is VGA input.
2. Push CV1 button to make sure there is CV1 input.
3. Push the [MENU] button, turn the knob, and choose <TEXT
OVERLAY>, push the knob to confirm.
Then enter into <TEXT OVERLAY> menu items, turn the knob, and
choose <TEXT OVERLAY>, push the knob to confirm, turn the knob
again, and choose ―ON‖ to enable the text overlay function.
4. Make sure VGA input is IMAGE B, and CV1 input is IMAGE A, if not,
choose <SWAP WINDOW> option in <PIP>, and choose ―ON‖ for
<SWAP WINDOW>.
5. That is, choose the VGA image in ―IMAGE B‖ in <SELECT> in <PIP>
menu, and push [SCALE] button to adjust the size and position of VGA
ADJUST >>
->TEXT OVERLAY >>
PIP >>
AUDIO >>
*TEXT OVERLAY ON
PRESET USER MODE
BLEND MODE MODE1
BLEND LEVEL 0
PIP ON
LAYOUT PIP L+T
SELECT IMAGE A
->SWAP WINDOW ON
关