RGBLink VSP 112U - Manual (Page 95)

6. System Setup and Operation
How to Realize the Text Overlay Setting
VSP 112U User Manual 95
image, then set the VGA image to the required position.
The standard position and size is: ensure the VGA image overlay on the
CV1 image, display normally and without black edges. If there are black
edges around VGA image, choose <ZOOM> option in <PICTURE> to
adjust.
6. Set the text overlay mode: choose <PRESET> option in <TEXT
OVERLAY>, push the knob to enter into the <PRESET> menu items.
Turn the knob to choose the preset mode, for example, set the VGA text
as WhOnBk, choose WhOnBk1 or WhOnBk2 (Note: Text Overlay only
support monochrome subtitles), user can also adjust the <BLEND
MODE> or <BLEND LEVEL> to get a better effect.
7. Push the [SAVE] button to save the above parameters.
->
H SIZE
1920
V SIZE
1080
H POS
0
V POS
0
->RESET
TEXT OVERLAY ON
->PRESET WhOnBk2
BLEND MODE MODE1
BLEND LEVEL 0