RGBLink VSP 112U - Manual (Page 96)

6. System Setup and Operation
How to Realize Test Pattern Output and Settings
VSP 112U User Manual 96
How to Realize Test Pattern Output and Settings
Test Pattern is used to calibrate the screen or system, especially when
there is not standard input measure instrument.
There are 66 kinds of test patterns for VSP 112U.
Push the [MENU] button and go into the menu items, turn the knob and go
to <SYSTEM> menu as following:
Push the knob and go into the <SYSTEM> menu. Turn the knob and go to
<DISPLAY MODE> menu as following:
Push the knob to go into the <DISPLAY MODE> menu. Turn the knob and
go to <PURE COLOR> or <TEST PATTERN> option.
<PURE COLOR>: Push the knob and go into the menu, RED color range is
from 0~255, GREEN is from 0~255, and BLUE is from 0~255.
<TEST PATTERN>: Push the knob and go into the menu, there are 66
->SYSTEM 》
LANGUAGE/ 语言 ENG
LOCK FRONT PANEL 》
FACTORY RESET 》
->DISPLAY MODE 》
DELAY CALL 0S
INPUT DETAIL 》
OUTPUT DETAIL 》
MODE PURE IMAGE
->PURE COLOR 》
->RED 255
GREEN 255
BLUE 255