RGBLink VSP 9516S Quick Start User Manual
Page 20
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
19
(9) Push the [MENU/EFFECT] button to return to the previous menu, turn the knob, and
choose <SENDING CARD SET>, push the knob to confirm, and enter to the next level
menu:
(10) Turn the knob, choose <X>, and set X as 360 (Note: X=VERTICAL CARD×WIDTH,
before we set vertical card as 3 and width as 120). Shown as follows:
(11) Same as above, set X of Port D of No.2 sending card as 360. Then connect the Port
D and Port U of Two Sending Cards to LED display is finished.
Rendering is as follows:
>
SENDING CARD SET >>
RECEIVING CARD SET >>
>
X 0
Y 0
SAVE TO SENDER CARD
>
X 360
Y 0
SAVE TO SENDER CARD