How to load the saved parameter – RGBLink VSP 9516S Quick Start User Manual
Page 25
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
24
How to Load the Saved Parameter
1. Push the[LOAD/PIP2] button, the button light is on, and enable the LOAD function.
2. Turn the knob, and choose the position that will load, push the knob to confirm.
User can also push the [MENU/EFFECT] button to enter to the menu items, turn the knob to choose
<SAVE SETUP>, and choose <LOAD FROM> to load the saved parameter.
3. Push the [LOAD/PIP2] button again, the button light if off, and disable the LOAD function.
LOAD FROM
>SAVE 1
Button on is ready for recall
Button flashes means just recall