RGBLink VSP 112W User Manual - Manual (Page 73)

5. Communication Software Guideline
How to Connect PC Through LAN Interface?
VSP 112W User Manual 73
How to Connect PC Through LAN Interface
First, install the upper computer software in the computer;
Connect VSP 112W and computer with cable, the connection diagram is
as follows:
Power on VSP 112W, start the network function, specific steps are as
follows:
The fist step: push MENU button ,get into MENU—SYSTEM—ETHERNET,
check the IP address of the equipment, the equipment factory default IP
address : 192.168.0.100.
The second step: check computer IP address, Mouse click start, choose
Run ,run <cmd> instruct ,
Click <OK>,run <ipconfig> ,
<Enter> button,the IP address of the red circle display for the computer:
192.168.0.15 ;