RGBLink VSP 112W User Manual - Manual (Page 86)

6. System Setup and Operation
How to Set Up the Size and Position of the Single Image
VSP 112W User Manual 86
How to Set Up the Size and Position of the Single Image
1. Press MENU button, enter the menu option. Press UP/DOWN button,
choose the [OUTPUT] option.
2. Press SEL button to confirm, then press UP/DOWN button, choose
[SCALE] option.
3. Press SEL button, and set the required value, press SEL button to
confirm.
4. After finish, press MENU to return to top level menu.
Note
The [SCALE] button can also fulfill this setting.
INPUT >>
>OUTPUT >>
>H SIZE 1920
V SIZE 1200
OUTPUT ADJUST >>
>SCALE >>
>H POS 0000
V POS 0000