For the installer: final check list – Scotsman CME865W User Manual

Page 9

Advertising
background image

FOR THE INSTALLER: Final Check List

1. Is the ice maker cabinet in a room where
ambient temperatures are within the minimum and
maximum temperatures specified?

2. Is there clearance at both sides of the cabinet
and at the back and top for service and utility
connections?

3. Has water supply pressure been checked to
insure a minimum of 20 PSIG and a maximum of
80 PSIG operating pressure?

4. Is the cabinet level?

5. Check that any shipping material has been
removed from inside the cabinet.

6. Have all electrical and piping connections been
PROPERLY made?

7. Are the Master and Compressor switches on
OFF?

8. Has power been connected to the ice maker?

9. Is the water supply line shut off valve installed?

10. Check all refrigerant lines and conduit lines, to
guard against vibration or rubbing and possible
failure.

11. Have the bin and cabinet been wiped clean
and sanitized?

12. Has the Customer Evaluation & Warranty
Registration form been properly filled out? Check
for correct model and serial numbers from Serial
nameplate, then mail the completed form to
SCOTSMAN.

13. Has the owner been given the name and
telephone number of the authorized SCOTSMAN
Service Agency serving him?

CME865W & CME1002W

December, 1994

Page 9

Advertising
This manual is related to the following products: