Scotsman MDT6N90 - Manual (Page 2)

FOR THE INSTALLER: Specifications
This ice maker-dispenser is designed to be
mounted on a machine stand, or a countertop.
Before beginning the installation, check that all the
materials and kits required are available at the
installation location.
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of U.L., N.S.F., and C.U. L. Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
Water Limitations:
An ice machine is a food
manufacturing plant; it takes in
a raw material, water, and
turns it into a food product,
ice. The purity of the water is
very important in obtaining
pure ice and in maximizing
product life.
General recommendations
are:
1. Filter the water used to
produce ice.
2. Check with a water
treatment specialist for a water
test, and any
recommendations regarding
filters and treatment.
MDT6N90
August 2010
Page 2
Electrical Junction
Box
3/8" Flare
Water Inlet
3/8" FPT
Cond. Water
Inlet
(W/C)
1/2" FPT
Cond. Drain
(W/C)
3/4" FPT
Drain
.75"
17.59"
5.59"
3/4 FPT
Drain
2.63"
12.5"
6.63"
7.93"
4.63"
3.84"
BACK VIEW
Model Number Model
Series
Dimensions
(w/o stand)
H" x W" x D"
Condenser
Type
Refrigerant
Charge
(R-404A)
Basic
Electrical
Minimum
Circuit
Ampacity*
Max.
Fuse
Size
MDT6N90A-1 J 45.74 x 35.18 x 29.26 Air 32 115/60/1 18.1 25
MDT6N90W-1 J same Water 19 115/60/1 16.5 20
MDT6N90AS-1 A or B same Air 32 115/60/1 18.1 25
MDT6N90WS-1 A same Water 22 same 16.5 20
MDT6N90WS-1 B same Water 19 same 16.5 20
*Minimum circuit ampacity is used to determine wire size and type per National Electric Code.
Options: Machine stand DMS31.