Wiring diagram, Operation, Lighting instructions – Design Dynamics DVF-36S-N User Manual

Page 21: For your safety read before lighting

Advertising
background image

www.desatech.com

120441-01A

21

WirinG DiAGrAM

EV2

EV1

ORANGE

IGNITOR LEAD

GREEN

PILOT

TRANSFORMER

IS1070

B

SYNETEK CONTROLS IN

C

24V

AC

E4

E2

E3

E6

RED

E8

E12

BLUE

120V

AC

GROUND

120
VAC

ADAPTER/
REMOTE
RECEIVER

J-BOX

BLACK

WHITE

OPerAtiOn

C. Do not use this appliance if any part

has been under water. Immediately call
a qualified service technician to inspect
the appliance and to replace any part of
the control system and any gas control
which has been under water.

LIGHTING

INSTRUCTIONS

NOTICE: During initial operation

of new fireplace, burning logs

will give off a paper-burning

smell. Orange flame will also

be present. Open damper or

window to vent smell. This will

only last a few hours.

1. STOP! Read the safety information

above.

2. Turn off all electric power to the

fireplace.

3. Turn wall switch to the OFF position.
4. Remove center brick/control cover.
5. Turn equipment shutoff valve clock-

wise

to the OFF position (see

Figure 34, page 22). Do not force.

FOR YOUR SAFETY

READ BEFORE LIGHTING

WARNING: If you do not fol-

low these instructions exactly,

a fire or explosion may result

causing property damage, per-

sonal injury or loss of life.

A. This appliance is equipped with an igni-

tion device which automatically lights
the pilot. Do not light pilot by hand.

B. BEFORE LIGHTING smell all around

the appliance area for gas. Be sure to
smell next to the floor because some
gas is heavier than air and will settle
on the floor.

WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do

not use any phone in your building.

• Immediately call your gas supplier

from a neighbor's phone. Follow the
gas supplier's instructions.

Advertising