Product identification, Local codes, Product features – Design Dynamics DVF-36S-N User Manual

Page 4: Safety information

Advertising
background image

www.desatech.com

120441-01A

4

3. Never install the fireplace

• in a recreational vehicle
• in windy or drafty areas where curtains

or other combustible (flammable) objects
can make contact with the fireplace
front

• in high traffic areas

4. Turn fireplace off and let cool before

servicing, installing or repairing. Only a
qualified service person should install,
service or repair this fireplace. Have fire-
place inspected annually by a qualified
service person.

5. You must keep control compartments,

burners and circulating air passages
clean. More frequent cleaning may be
needed due to excessive lint and dust
from carpeting, bedding material, etc.
Turn off the gas valve and pilot light before
cleaning fireplace.

6. Have venting system inspected annually by

a qualified service person. If needed, have
venting system cleaned or repaired. See
Cleaning and Maintenance, page 23.

7. Do not use any solid fuels (wood, coal,

paper, cardboard, etc.) in this fireplace.
Use only the gas type indicated on fire-
place nameplate.

8. This appliance, when installed, must be

electrically grounded in accordance with
local codes or, in the absence of local
codes, with the National Electrical Code,
ANSI/NFPA 70
or the Canadian Electrical
Code, CSA C22.1.

9. Do not use fireplace if any part has been

exposed to or under water. Immediately
call a qualified service person to arrange
for replacement of the unit.

10. Do not operate fireplace if any log is

broken.

11. Do not operate fireplace with glass door

removed, cracked or broken.

12. Provide adequate clearances around air

openings.

SAFety inFOrMAtiOn

Continued

PrODUct

iDentiFicAtiOn

Figure 1 - Direct Vent Fireplace

(DVF-36SC Shown)

Outer
Glass
Door

Log Set

Flue
Collar

Nailing
Flange

LOcAL cODeS

Install and use fireplace with care. Follow all
local codes. In the absence to local codes,
use the current National Fuel Gas Code ANSI
Z223.1/NFPA 54*
(USA) or the current CSA-
B149.1 Installation Code
(Canada).
*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

PrODUct FeAtUreS

These are a few facts that can help you under-
stand and enjoy your direct vent fireplace:
• The venting system may be routed to the

outside of your home in several ways. It
may vent through the roof (vertical) or it
may vent to an outside/exterior wall (hori-
zontal). The vent pipe installation is very
important to allow for proper operation.
You must follow the venting instructions
very carefully for either vertical or horizontal
applications.

Center Brick/
Control Cover

Standard
Brick
Refractories

Aniron

Advertising