SoundTraxx DSD-150/DSX Technical Reference - Manual (Page 26)

Address Mode Direct Mode
Register Mode Ops Mode Short Form
Paged Mode Ops Mode Long Form
26 Digital Sound Decoder Technical Reference
CV 34
FL(r) OUTPUT
LOCATION
Description
Maps the FL(rev) function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:
bit 7 bit 0
DYNO F5 HISS BELL WHSTL F1 BL HL
Bit 0: HL, Head light output
0 = Output is unaffected by FL(rev).
1 = Output is activated when FL(rev) is on.
Bit 1: BL, Backup light output
0 = Output is unaffected by FL(rev).
1 = Output is activated when FL(rev) is on.
Bit 2: F1, Function 1 Output
0 = Output is unaffected by FL(rev).
1 = Output is activated when FL(rev) is on.
Bit 3: WHSTL, Whistle Sound Effect
0 = Sound is unaffected by FL(rev).
1 = Sound is activated when FL(rev) is on.
Bit 4: BELL, Bell Sound Effect
0 = Sound is unaffected by FL(rev).
1 = Sound is activated when FL(rev) is on.
Bit 5: HISS, Cylinder Blowdown/Hiss Sound Effect
0 = Sound is unaffected by FL(rev).
1 = Sound is activated when FL(rev) is on.
Bit 6: F5, Function 5 Output
0 = Output is unaffected by FL(rev).
1 = Output is activated when FL(rev) is on.
Bit 7: DYNO, Dynamo Sound Effect
0 = Sound is unaffected by FL(rev).
1 = Sound is activated when FL(rev) is on.
A value of 00 sets FL(rev) to control BL output.
Default Value: 2
Related CVs: See also CVs 33-42.
❐ ■
❐ ❐
■ ■