Cv 49 hyperlight configuration – SoundTraxx DSD-150/DSX Technical Reference User Manual
Page 35

Address Mode
Direct Mode
Register Mode
Ops Mode Short Form
Paged Mode
Ops Mode Long Form
Digital Sound Decoder Technical Reference
35
CV 49
HYPERLIGHT
CONFIGURATION
Description
Used to reconfigure the F1 and F5 lighting outputs to one of four Hyperlight lighting effects:
bit 7
bit 0
F5.1
F5.0
F1.1
F1.0
Bits 1-0:
F1.1:F1.0, Function 1 Output Configuration
00 = Standard On/Off output
01 = Mars Light Effect
10 = Firebox Flicker Effect
11 = Synchronized Firebox Flicker - Turns on and off with sound effect of
firebox door opening and closing.
Bits 2-3:
F5.1:F5.0, Function 5 Output Configuration
00 = Standard On/Off output
01 = Mars Light Effect
10 = Firebox Flicker Effect
11 = Synchronized Firebox Flicker - Turns on and off with sound effect of
firebox door opening and closing.
Bit 4-7:
Reserved
Note: the selected lighting effect will not turn on until the appropriate function key is on as well.
Default Value: 0, F1 = On/Off Output, F5 = On/Off Output
❐
■
❐
❐
■
■