SoundTraxx DSD-150/DSX Technical Reference - Manual (Page 27)

Address Mode Direct Mode
Register Mode Ops Mode Short Form
Paged Mode Ops Mode Long Form
Digital Sound Decoder Technical Reference 27
CV 35
F1 OUTPUT
LOCATION
Description
Maps the F1 function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:
bit 7 bit 0
DYNO F5 HISS BELL WHSTL F1 BL HL
Bit 0: HL, Head light output
0 = Output is unaffected by F1.
1 = Output is activated when F1 is on.
Bit 1: BL, Backup light output
0 = Output is unaffected by F1.
1 = Output is activated when F1 is on.
Bit 2: F1, Function 1 Output
0 = Output is unaffected by F1.
1 = Output is activated when F1 is on.
Bit 3: WHSTL, Whistle Sound Effect
0 = Sound is unaffected by F1.
1 = Sound is activated when F1 is on.
Bit 4: BELL, Bell Sound Effect
0 = Sound is unaffected by F1.
1 = Sound is activated when F1 is on.
Bit 5: HISS, Cylinder Blowdown/Hiss Sound Effect
0 = Sound is unaffected by F1.
1 = Sound is activated when F1 is on.
Bit 6: F5, Function 5 Output
0 = Output is unaffected by F1.
1 = Output is activated when F1 is on.
Bit 7: DYNO, Dynamo Sound Effect
0 = Sound is unaffected by F1.
1 = Sound is activated when F1 is on.
A value of 00 sets F1 to control F1 output.
Default Value: 4
Related CVs: See also CVs 33-42.
❐ ■
❐ ❐
■ ■