Soundtube RSi Series - Manual

Install Instructions For:
RS4-EZ, RS400i, RS500i, HP590i, RS600i, HP690i, RS800i, HP890i, RS1001i-II, HP129i & HP1290i speakers
Box contents
1 Speaker
2 SpeedClamps™
1 Release key (small hex wrench)
1 Hanging cable
1 Safety cable
1 Terminal weather boot
1 Euroblock connector
1 Grille-mounted tap switch cover
4 Zip ties
Safety cable with clip
Terminal weather boot
Signal wire
Euroblock connector
Surface-mount
bracket insert
Euroblock jack
Hanging cable with clip
Hanging or safety cable
Secure anchor point
SpeedClamp™
Grille-mounted
tap switch cover
(except RS4-EZ)
RS4-EZ & RS400i tap location
Tap switch
Euroblock jack
© 2008 SoundTube Entertainment, Inc. All rights reserved. PN INS-RSI Rev 09.15.08 RS400i, RS500i, RS600i, RS800i, RS1001i-II, HP690i and HP890i - UL listed 1480
1.435.647.9555 | 800.647.TUBE | www.soundtube.com
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Warning Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.