Soundtube SM590i-II - Manual

Box contents
1 Speaker
1 Terminal weather boot
1 Mounting bracket with ball joint
1 Safety cable
2 Safety cable anchor screws
1 Euroblock connector
1 Grille-mounted tap switch cover
1 Theft-resistant screw
1 Extra - Ball joint anchor pad
© 2005 SoundTube Entertainment, Inc. All rights reserved. PN INS-SMI Rev 07.15.05
Install Instructions For:
SM590i and SM500i speaker
1.435.647.9555 | 800.647.TUBE | www.soundtube.com
Transformer Taps Settings
Terminal
weather boot
Safety cable anchor screw
Safety cable
Signal wire
Euroblock connector
Euroblock jack
Mounting bracket
Ball joint
Speed Lever™
Grille-mounted
tap switch cover
Theft-resistant screw
Ball joint anchor pad
Clamping cavity
70.7 Volt Transformer Taps (dB) 100 Volt Transformer Taps (dB) 25 Volt Transformer Taps (dB) Voice Coil
SM590i
SM500i
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Warning Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
33W=103.5, 17W=101, 9W=98, 6W=96.5, 3W=93.5 33W=103.5, 17W=101, 9W=98, 6W=96.5 5W=95.5, 2.5W=92.5, 1.3W=89.5, .63W=86.5 8 Ohm=108 dB
33W=105.5, 17W=103, 9W=100, 6W=98.5, 3W=95.5 33W=105.5, 17W=103, 9W=100, 6W=98.5 5W=97.5, 2.5W=94.5, 1.3W=91.5, .63W=88.5 8 Ohm=110 dB