Sundance SMT391-VP - Manual (Page 30)

Version 1.3 Page 30 of 41 SMT391-VP User Manual
Installation
How to connect your SMT391 to your SMT338-VP?
The following diagram shows both the SMT338-VP and the SMT391 (together they
form the SMT391-VP). There are four mounting holes on each board. The two larger
holes on the SMT338-VP are the TIM mounting holes and provide the SMT338-VP
with 3.3V. The two smaller holes add extra stability when the SMT391 is plugged
onto the SMT338-VP (One of these holes on the SMT338-VP carries 1.5V and the
other one 2.5V. These voltages are however not used on the SMT391-VP. For this
reason it is thus safer to use Nylon screws).
Figure 16 – SMT391 to SMT338-VP Interconnection.
The following fixings are required to connect the SMT391 to the SMT338-VP: